BRUCHA panel DP

Only at BRUCHA you will find the roof panels with already THREE pre-assembled seals. DiBt supporting approval for PV mounting system to the BRUCHA panel PIR+ roof DP.

EXTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· Profile: trapezoidal 42 mm

· Crown distance: 333.3 mm

· Metal gauge: 0.6 mm (smaller metal gauge on request)

INTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· Profile 1 (profile 2 and 3 on request)

· Metal gauge: 0.5 mm (smaller metal gauge on request)

INSULATION CORE

· nonhalogen PIR/polyurethane rigid foam, approx. 96 % closed cells, continuously foamed

· absolutely no chlorofluorocarbons or halogenated chlorofluorocarbons − pentane foam process

· low thermal conductivity

· securely attached to the steel sheet

· density approx. 40 kg/m³

PANEL CONNECTION

· External, by overlapping of the corrugations, whereby the non-foamed sheet of a panel is placed over the corresponding section of the next panel.

· On the underside, by special shaping, whereby the complementary profile to the profile of one roof panel overlaps the profile of the second panel. The included seals offer additional reliability, achieving a reliably tight connection.

· Unique TRIPLE SEALING SYSTEM (as per diagram) offers optimal condensate protection.

· Capillary break

INDEPENDENT MONITORING

National and international tests, quality standards