BRUCHA panel DP-F

Fire protection roof panels for higher fire protection requirements for your building.

EXTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant – protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· Profile: trapezoidal 42 mm

· Crown distance: 333.3 mm

· Metal gauge: 0.6 mm (smaller metal gauge on request)

INTERIOR

· Visible side has 25 μm polyester coating without protective PVC film (if required, please specify with order.

· Profile 1 (profile 2 and 3 on request)

· Metal gauge: 0.5 mm (smaller metal gauge on request)

INSULATION CORE

· Structural, web-oriented mineral fibre wool

· Shear resistant bond with sheet steel covers

· Density approx. 120 kg/m³, 140 kg/m³ available on request.

PANEL CONNECTION

· External, by overlapping of the profiles, whereby the non-foamed sheet of a panel is placed over the corresponding sectiion of the next panel.

· On the underside, by special shaping, whereby the complementary profile to the profile of one roof panel overlaps the profile of the second panel. The included seals offer additional reliability, achieving a reliably tight connection.

· Capillary break

VAPOUR DIFFUSION

Determined by climatic conditions insied building. Panels must be installed vapour tight. Technical installation tips are provided in the installation guidelines.

INDEPENDENT MONITORING

National and international tests, quality standards