BRUCHA panel WP-A

The BRUCHA panel Acoustic - WP-A provides a practical and clean solution for sound absorption and insulation against airborne sound, for interior walls and false ceilings.

EXTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· Profile 1 - 6

· Metal gauge: 0.6 mm (smaller metal gauge on request)

INTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· Profile 2

· Hole proportion: 32.5 %

· Bore diameter: 3 mm round bore, offset

· Holes: DIN RV 3-5 (R3T5) (730-000)

· Metal gauge: 0.6 mm (smaller metal gauge on request)

INSULATION CORE

· Structural, web-oriented mineral fibre wool

· Shear resistant bond with sheet steel covers

· Density approx. 120 kg/m³, 140 kg/m³ available on request

PANEL CONNECTION

Tongue groove interconnect; panels interlink precisely with no thermal bridge.

VAPOUR DIFFUSION

Due to the vapour permeable inside cover, the use as an exterior wall for wet rooms and heated buildings is only conditionally possible, or not recommended.

INDEPENDENT MONITORING

National and international tests, quality standards