Choose from 19 different profile combination options and create your individual panel with all the advantages of BRUCHA FP-P panel.

EXTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· 19 various possible profile-combinations

· Metal gauge: 0.6 mm (smaller metal gauge on request)

INTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· Profile 1

· Metal gauge: 0.5 mm (smaller metal gauge on request)

INSULATION CORE

· nonhalogen PIR/polyurethane rigid foam, approx. 96 % closed cells, continuously foamed

· absolutely no chlorofluorocarbons or halogenated chlorofluorocarbons − pentane foam process

· low thermal conductivity

· securely attached to the steel sheet

· density approx. 40 kg/m³

PANEL CONNECTION

Double tongue and groove system in which the special labyrinth profile allows the screw head to be countersunk and fully covered by the next panel – covered, concealed fastened. The integrated seals guarantee maximum wind proofing.

The panels interlink precisely with no thermal bridge. The PREMIUM FP-P-S facade panel offers outstanding structural characteristics, as well as enabling even greater span widths through the use of the pressure distribution plate.

INDEPENDENT MONITORING

National and international tests, quality standards

Construction