With our classic BRUCHA wall panel - WP you have the possibility to emphasize any building shape, no matter how differentiated. The option of large transom spacing makes the construction method extremely favorable.

EXTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· Profile 1 - 6

· Metal gauge: 0.6 mm (smaller metal gauge on request)

INTERIOR

· Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.

· Profile 1 (profile 2 and 3 on request)

· Metal gauge: 0.5 mm (smaller metal gauge on request)

INSULATION CORE

· nonhalogen PIR/polyurethane rigid foam, approx. 96 % closed cells, continuously foamed

· absolutely no chlorofluorocarbons or halogenated chlorofluorocarbons − pentane foam process

· low thermal conductivity

· securely attached to the steel sheet

· density approx. 40 kg/m³

PANEL CONNECTION

"Tongue and groove system" and from 100 mm thickness with labyrinth system. The exterior and interior sheet steel covers are not connected to each other. The intergrated seal guarantees max. possible wind tightness. The panels interlink precisely, with no thermal bridge.

INDEPENDENT MONITORING

National and international tests, quality standards

Search for High Quality BIM Objects