Nozzle-jet diffuser PP - PF

Diffuser with high induction mobile micro-nozzles complete with ferrule, adjustable up to 30°, with 25 mm perimeter frame.

Installed mainly on vertical wall, they are particularly suitable in cases where it is necessary to provide, for architectural or structural reasons of the environment, different launch directions for the individual micronozzles, in particular to overcome obstacles (beams, lowering of the false ceiling, pillars, columns) . In the case of multiple rows, it is possible to diverge the launch as desired both horizontally and vertically, significantly expanding the area of influence. In consideration of the high inductive effect, due to the division of the flow rate into many small jets, a rapid decrease in the launch speed and the temperature difference between supply air and ambient air is obtained. They can be used in constant flow systems and in variable flow systems in the 40…100% range in both cooling and heating with a maximum ΔT equal to ± 10 K.

Possible direct mounting of the micronozzles on a circular stainless steel channel  (project execution).

Variants:

-PP.: micronozzles mounted on solid plate;

-PF.: micro nozzles mounted on a perforated plate: with the same flow rate, launch speed significantly lower than PP. And

shorter throws (BIM file not available)