KNX - Presence detector

Two operating modes in one device

A compact device with a twin function: the new movement / presence detector for automatic switching of the lighting, dependent on brightness and movement. It is persuasive due to its excellent detection properties (360° detection range) at mounting heights up to six metres. 

The movement / presence detector has three independent PIR sensors for movement detection. Each of these sensors is assigned to an individually activated range (each with a detection angle of 120°). In addition the detection range can be considerably extended by grouping up to five devices. It is therefore possible to adapt the device to the room conditions or to the specific application. Due to the integrated brightness sensor, the device can also be used as a twilight switch. 

Motion and presence detector with integrated relay switch

Including IR remote control ref.-no.: DWPM FB IR K

Intended use:

Automatic switching of lighting depending on the heat motion and ambient brightness

Indoor ceiling mounting, surface-mounted

Product characteristics:

- 2-point light control

- Functions settable with IR remote controls

- Restriction of the detection field by switching off individual sensors or push-on cover

- Operation with IR remote control, 2-wire extension or installation button

- Teach function for adjustment of the brightness threshold, in combination with IR remote controls

- Switch-off warning

- Short-time operation, e.g. to activate acoustic signal transmitters

- Display LEDs

- Presence simulation

- Function as twilight switch

- Dynamic run-on time

- Extension of the detection area through parallel switching of multiple devices 

Colours:

- White

- Aluminium (lacquered)