Nozzle-jet diffuser PP40 - PF40

Diffuser with mobile micro-nozzles, 40 mm diameter, high induction, complete with ferrule, individually adjustable with a maximum angle of 30° in each direction, with 25 mm wide perimeter frame.

Installed mainly on vertical wall, they are particularly suitable in cases where different launch directions must be provided for the individual micro-nozzles, for example to overcome obstacles (beams, lowered ceilings, pillars, columns). In the case of multiple rows, it is possible to diverge the launch as desired both horizontally and vertically, significantly expanding the area of influence. In consideration of the high inductive effect, due to the division of the flow rate into many small jets, a rapid decrease in the launch speed and the temperature difference between supply air and ambient air is obtained. They can be used in constant flow systems and in variable flow systems in the 40…100% range in both cooling and heating with a maximum Δt equal to ± 10 K.

Variants:

PP40.: micro nozzles mounted on FULL plate;

PF40.: micro nozzles mounted on a PERFORATED plate: with the same flow rate, launch speed significantly lower than PP40. and launches of shorter length, with the same nominal flow rate for a single micronozzle. (BIM not available)